Creatbot D600 Pro Dual Extruder 3D Printer

Introduction:

The CREATBOT D600 is truly an impressive manufacturing machine. Its super large and completely closed Build space of 600 x 600 x 600 mm is perfect if you like to process advanced filaments like PEEK, Ultem, Nylon, PC, or other thermoplastics that need high-temperatures (for example ABS). The D600 Pro is an industrial high-temperature 3D printer with very high manufacturing quality and enormously large heated Installation space (60x60x60 cm). The all-metal frame always offers you smooth running, precise linear guidance of the extruder, and enormous noise reduction.

Features:

• The industrial linear guide rail is key to high manufacturing quality.
• Completely enclosed construction chamber for stable temperatures and noise reduction.
• Manufacturing temperature up to 260°C hotend(left) and 420°C hotend(right).
• Hot air chamber can provide constant room temperature so that model won’t deform when printing.
• Dry filaments like Nylon, PC, ABS, which with high water absorption, 45°C and 65°C chamber temperature available.
• The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.
• The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. 
• Perfect for additive production with high-performance thermoplastics.

CreatBot D600 Pro improvements over D600:

• 25 control points check the setting of the building platform and level it automatically.
• Precise linear guide rail for stable and smooth running.
• Power failure protection automatically remembers the last position and continues 3D printing.
• Heated building platform made of glass and BuildTak adhesives.
• Easy control via the 4.3-inch touch screen.
• The construction chamber heated to 70 degrees minimizes warping.
• Filament drying chamber for nylon and other hydrophilic filaments.
• Manufacturing temperature up to 260°C hot-end(left) and 420°C hot-end(right).
• High precision 3D printing – up to 0.05 mm.
• Stable installation space made of steel guarantees reliable results.
• Very large installation space of 600 x 600 x 600 mm.
• Completely enclosed construction chamber for stable temperatures and noise reduction.
• Perfect for additive production with high-performance thermoplastics.